Universal Small Form Factor Modbus Remote I/O Extension Module with RS485 Modbus/RTU Interface, 8 Universal TTL Level I/O
Series: Barix Barionet
Model: Barix X8
- 8x General purpose I/O
- 1x RS-485 serial port
- 9 to 30V Supply voltage
- Wiegand interface capable
- Up to 8 temperature sensors supported
Barix X8 is I/O to RS-485 Modbus converter for commercial interfacing, control and home automation applications.<br>Using the industry standard Modbus protocol over 2-wire RS-485 the device can be controlled from any Modbus capable master.<br>The eight I/O ports support TTL level (5VDC) with limited current range for outputs (supply voltage depending, 24 to 85mA total). For applications with industrial voltage level (10 to 30VDC) and higher currents (maximum 6A total) select the Barix Barionet IO12 instead.<br>Over the RS-485 interface each I/O port can be configured as either an input or an output. Outputs can be preset with a power-on value. I/O ports can be configured to support up to 16 1-wire temperature sensors, one humidity sensor and an access reader supporting the WIEGAND interface (data, tampering alarm, buzzer and LED).<br>Barix X8 supports Modbus/RTU protocol speeds of 9600 and 19200 Bauds, with and without parity. A 4-wire cable (2 bus, 2 power) can be used to connect other Modbus devices in a bus or a star configuration. Up to 31 Barix X8 converters can be directly connected to a Modbus master such as the Barix Barionet and can be increased to up to 250 converters using standard RS-485 repeaters.<br>Using the Barix Barionet, the Barix X8 can be controlled by a local Basic application (BCL) as well as remotely using TCP, UDP, Modbus/TCP and SNMP.<br>Two mounting brackets with 5mm holes allow mounting on surfaces but can be removed (predetermined braking line) if not used
- 8x General purpose I/O
- 1x RS-485 serial port
- 9 to 30V Supply voltage
- Wiegand interface capable
- Up to 8 temperature sensors supported
- Applications:
- Voice evacuation systems, 8TTL general purpose
- Temperature monitoring, logging and HVAC control
- General I/O to RS-485 converter (inputs and outputs)
- WIEGAND reader to RS-485 converter (inputs and outputs)
- Up to eight push buttons (inputs) or LED’s for status display
- Local temperature and humidity reading (inputs) Software Barix X8 available:
- 8 configurable inputs/outputs (TTL-level)
- Presetable power-on value for outputs
- RS-485 serial interface
- Protocol: Modbus/RTU
- Connects to LED displays, buttons, temperature and humidity sensors
- Converts WIEGAND reader interface to RS-485 serial interface
- Systems Controlled - Audio
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: FCC, CE
- AC Voltage (Maximum): 24 Volts
- AC Voltage (Minimum): 12 Volts
- Active Power: 1 Watt
- DC Voltage: 30 Volts
- Number of RS-485 Serial Ports: 1
- Connectors:
•Power/RS-485, I/O (I/O, 5Vout,GND) and service interface on spring contact connector blocks for wires AWG 28 - AWG 16/0.08 - 1.3mm² - Inputs/Outputs:
•8 I/O‘s (usage and power-on preset configurable over RS-485) on spring contact connector block for wires AWG 28 - AWG 16/0.08 - 1.3mm²
•Inputs with internal 10-kOhm pull-up
•Max total 5 Vout and outputs current at (V supply): 24mA (30VDC), 32mA (24VDC), 85mA (12VDC) - RS-485/Protocol:
•RS-485 (2-wire), 9600/19200 Baud , 8 bit, Even/No parity software configurable, Modbus/RTU protocol - Misc:
•1 LED for power indication
•1 LED for RS-485 active send indication
•2 LED for internal status indication
•External connector for default settings jumper - MTBF:
•Minimum 590 000h according to MIL217F at 25°C ambient temperature - Case:
•High quality plastic, 33g, Ø 2" (2.75" mounting ) h 0.9"/ Ø 51mm (70mm mounting) h 23mm
Suggested Products
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com