3" Gooseneck Microphone with Stainless Steel Finish, Red and Green LEDs, Touch Sensor Output
Model: IML3-SS
- High Definition Microphones™ for conference rooms and fixed sound installations
- Near-perfect polar response (uniform frequency response at 0°, 45° and 90°)
- Very high intelligibility
- LumiComm™ LED touch ring (dual colors of red and green)
- Can be Installed in conference tables (includes lock nut)
Gooseneck microphones with programmable LumiComm™ light ring and touch sensor for permanent tabletop and ceiling installation for conferencing and other speech applications. When capturing every word is critical, the IML microphones are the most reliable miking solution. Optimized for speech, the IM microphones feature a frequency response out to 30kHz that delivers the highest level of speech intelligibility and articulation. This means less straining to understand the words being spoken due to poor audio quality, so more time can be spent understanding the message being transmitted.
Whether speaking directly on-axis or to the sides of the microphone, the IML microphone always reproduces the speaker’s voice with incredible clarity and intelligibility. This wider coverage also means that fewer Earthworks microphones are required to properly cover a conference room, cutting down on the number of channels of DSP, cables and other ancillary equipment required for the system. Compatible with all DSP systems that provide 24-48V phantom power, the IML microphones can easily integrate into existing system designs or new installations.
- High Definition Microphones™ for conference rooms and fixed sound installations
- Near-perfect polar response (uniform frequency response at 0°, 45° and 90°)
- Very high intelligibility
- LumiComm™ LED touch ring (dual colors of red and green)
- Can be Installed in conference tables (includes lock nut)
- More gain before feedback
- High rejection of sounds from the rear of the microphone
- 20Hz to 30kHz frequency response
- RF shielding against cell phones and other RF devices
- 139dB max acoustic input
- Requires 24 - 48V phantom power
- Available in black, white or stainless steel
- Polar/Pickup Pattern - Cardiod
- Spec Sheet available - Yes
- Output: XLR (pin 2+)
- LumiComm™ connector: Phoenix or RJ45
- Output Impedance: 65ohm balanced (between pins 2 and 3)
- Min Output Load: 600ohm between pins 2 and 3
- Maximum Frequency Response (Bandwidth): 30 kHz
- Maximum Frequency Response (Bandwidth): 30000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Impedance: 65 ohm
- Maximum SPL (Sound Pressure Level): 139 dB
- Sensitivity: -34 dBV
- Current Draw: 0.85 Amps
- DC Voltage: 48 Volts
- Noise: 16 dB
Suggested Products
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com