Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Dual 2-way Microphone Splitter Module with Phantom
Model: DIN-2MS-2P
- Provides additional, isolated balanced output as mic splitter
- Solves transformerless preamp RFI and CMRR problems
- High common-mode rejection of 130dB at 60Hz
- Excellent frequency response and time domain performance
- Provides support circuitry for phantom powered microphones
Product Info
Tech Specs
Documents
Dual 2-way microphone splitter module with phantom. This module is designed to be driven from a 150 ohm microphone source and loaded by the typical 1kohm input impedance of microphone preamplifiers. It can be used with balanced or unbalanced sources and/or loads since both primary and secondary are fully balanced. A 30dB magnetic shield package is standard.
- Provides additional, isolated balanced output as mic splitter
- Solves transformerless preamp RFI and CMRR problems
- High common-mode rejection of 130dB at 60Hz
- Excellent frequency response and time domain performance
- Provides support circuitry for phantom powered microphones
- Spec Sheet available - Yes
- Input Impedance: 1.08 kohm (1kHz, -20dBu, test circuit 1)
- Voltage Gain: -0.82 dB (1kHz, -20dBu, test circuit 1)
- Magnitude response, ref 1kHz: -0.09 (20Hz, -20dBu, test circuit 1) and -0.10 (20kHz, -20dBu, test circuit 1) dB
- Deviation from linear phase (DLP): +1.7/-0 degree (20Hz to 20kHz, -20dBu, test circuit 1)
- Distortion (THD): <0.001 (1kHz, -20dBu, test circuit 1) and 0.036 (20Hz, -20dBu, test circuit 1) %
- Maximum 20Hz output level: +2.0 dBu (1% THD, test circuit 1)
- Common-mode rejection (CMRR) ratio: 130 (60Hz, test circuit 2) and 95 (3kHz, test circuit 2) dB
- Output Impedance: 250 ohm 1kHz, test circuit 1
- DC Resistance: 50 primary (pin 4 to pin 5, or pin 13 to 14) and 50 secondary (pin 7 to pin 8, or pin 16 to 17) ohm
- Capacitance: 75 (primary to shield and case) and 87 (secondary to shield and case) pF
- Turns Ratio: 1:1.000 (primary to any secondary )
- Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60 Hz, 1 minute test duration
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): 32 F
Splitter Module
211 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Jensen Transformers, Inc.
Model: DIN-2MS-2P
Request more information from a dealer near you
close
Request more information from a dealer near you