Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4K/18G HDBT POH Extender
Model: KD-X444S
- HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
- 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx
- Low Profile: Super slim chassis design
- Signal Extension: For resolution and cable quality
Product Info
Tech Specs
Documents
The KD-X444S is a 4K/18G HDBT POH Extenders (Includes KIT Tx/Rx 4K/40meters 1080P/70meters).
- HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
- 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx
- Low Profile: Super slim chassis design
- Signal Extension: For resolution and cable quality
- 4K/UHD: 125ft. (40m) maximum »» 1080p: 230 ft. (70m) maximum
- HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
- HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
- Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
- EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
- Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source and display, EDID Control handshake, and Hot Plug Detection control
- IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
- Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
- RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
- Unit Control Mode: Provides control of Tx unit as well as connectivity status
- Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
- CEC Pass-thru: For inter-device control between input and output HDMI channel
- Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc
- Extender Type - HDMI
- Extender Type - RS232
- Warranty - Yes
- Spec Sheet available - Yes
- Certifications: CE, WEEE, EAC
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 20 Watt
- Current Draw: 66 Amps
- DC Voltage: 12 Volts
- Depth: 4.10 in
- Height: 0.88 in
- Width: 2.80 in
- Product Weight: 0.75 lbs
- Color: Black
- Warranty (Length/Type): 3 Years
Extenders
366584 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Key Digital Systems
Model: KD-X444S
Request more information from a dealer near you
close
Request more information from a dealer near you