Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Passive Single-Pair Sender
Series:
Model: DS-TPS7A
- Stereo Audio Input Combined to Mono Output
- Input on Mini-jack
- Switch Selects which RJ45 Pair (A, B or C) is Fed
- Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
- Passive Circuitry Does Not Require Power
Product Info
Tech Specs
Related Products
Documents
Accessories
The DS-TPS7A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features a single stereo mini-jack intended for stereo consumer line level audio sources. A studio-quality transformer provides isolation between the audio source and the RJ45 TP CABLE. The DS-TPS7A is a single-pair sender, feeding the input signal to the cable pair set on the rear-panel switch during installation. This module drives only one cable pair, therefore a TP CABLE RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to a TP CABLE jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The DS-TPS7A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C. The DS-TPS7A is a passive module that does not require power to operate. If power is present on a cable connected to a TP CABLE jack, that power is passed through to the modules connected to the other TP CABLE jack.
- Stereo Audio Input Combined to Mono Output
- Input on Mini-jack
- Switch Selects which RJ45 Pair (A, B or C) is Fed
- Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
- Passive Circuitry Does Not Require Power
- Galvanic Isolation through a Studio-Quality Transformer
- Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
- Spec Sheet available - Yes
- Depth: 1.89 in
- Height: 4.11 in
- Width: 1.60 in
- Shipping Weight: 0.40 lbs
- INPUT: 3.5mm mini-jack, unbalanced stereo combined to mono
- Input Level: -10 dBV +22 dBu max
- Format-A Signal Pair Used: Switch-selectable A, B, or C (rear-panel switch)
- Format-A Input: RJ45 TP CABLE
- Ouput: RJ45 TP CABLE, RDL TP Format-A
- Frequency Response: 20 Hz to 20 kHz (±0.5 dB)
- THD: < 0.1% (50 Hz to 20 kHz); <0.001% (1 kHz typ)
- Power Requirement: Passive
D-RC2
- Remote Audio Mixing Control
D-RC2M
- Remote Audio Mixing Control with Muting
D-RC3
- Remote Audio Mixing Control
D-RC3M
- Remote Audio Mixing Control with Muting
D-TPS6A
- Passive Single-Pair Sending Module
D-TPS7A
- Passive Single-Pair Sender
DB-TPS3A
- DB-TPS3A
Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA inputs
DS-RC2
- Remote Audio Mixing Control
DS-RC2M
- Remote Audio Mixing Control with Muting
DS-RC3
- Remote Audio Mixing Control
DS-RC3M
- Remote Audio Mixing Control with Muting
DS-TPS6A
- Passive Single-Pair Sender
FP-MX3R
- Remote Controlled Line-Level Mixer
FP-TPX3A
- Format-A Twisted Pair Remote Controlled Mixer
RU-BNF
- Format-A Bi-directional Network Interface
RU-BNFP
- Format-A Bi-directional Network Interface with PoE
RU-FN
- Format-A to Network Interface
tpp7a_tps7a[3]1.pdf
1397 kb
- Data Sheet
CP-1
Single Cover Plate - white
CP-1G
Single Cover Plate - gray
CP-2
Double Cover Plate - white
CP-2G
Double Cover Plate, Gray
DC-1G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-1W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
SMB-1G
Surface Mount Boxes for Remote Controls and Panels
SMB-1W
Surface Mount Boxes for Remote Controls and Panels
SMB-2G
Surface Mount Boxes for Remote Controls and Panels
SMB-2W
Surface Mount Boxes for Remote Controls and Panels
SMB-3G
Surface Mount Boxes for Remote Controls and Panels
SMB-3W
Surface Mount Boxes for Decora® Remote Controls and Panels
SMB-4G
Surface Mount Boxes for Remote Controls and Panels
SMB-4W
Surface Mount Boxes for Decora® Remote Controls and Panels
Single Cover Plate - white
CP-1G
Single Cover Plate - gray
CP-2
Double Cover Plate - white
CP-2G
Double Cover Plate, Gray
DC-1G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-1W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
SMB-1G
Surface Mount Boxes for Remote Controls and Panels
SMB-1W
Surface Mount Boxes for Remote Controls and Panels
SMB-2G
Surface Mount Boxes for Remote Controls and Panels
SMB-2W
Surface Mount Boxes for Remote Controls and Panels
SMB-3G
Surface Mount Boxes for Remote Controls and Panels
SMB-3W
Surface Mount Boxes for Decora® Remote Controls and Panels
SMB-4G
Surface Mount Boxes for Remote Controls and Panels
SMB-4W
Surface Mount Boxes for Decora® Remote Controls and Panels
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Radio Design Labs
Model: DS-TPS7A
Request more information from a dealer near you
close
Request more information from a dealer near you