Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
35 W Mono Audio Amplifier 25 V, 70 V or 100 V, with Power Supply
Series: FLAT-PAK
Model: FP-PA35A
- 35 Watts RMS Constant Voltage Amplifier
- 25 V, 70 V or 100 V Output
- Automatic Energy-Saving Sleep Mode
- Selectable Sleep Delay: Off, 5, 15, 25 Minutes
- Input / Output Terminal Block Connections
Product Info
Tech Specs
Related Products
Documents
The FP-PA35A is the ideal choice in many applications where multiple 25 V, 70 V or 100 V speakers in a zone need to be powered from a single audio power amplifier. The FP-PA35A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. Multiple distributed sound system speakers connect to the corresponding 25 V, 70 V or 100 V amplified output. The FP-PA35A includes an analog compressor/limiter for audio fidelity audibly superior to conventional class D amplifiers with digital limiting. The input GAIN setting determines whether the limiter alone is used for clipping suppression, or if the full compressor/limiter will be used to substantially increase the average output power beyond that of a standard 35 W amplifier. A red COMPRESSION LED flashes when the limiter is preventing output clipping. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics. If the input level is increased so that the compressor is active, the LED remains dimly lit between peak flashes. The audio is compressed according to three dynamic time constants providing aural transparency while maintaining clean, unclipped amplified audio for input overloads of up to 20 dB. The FP-PA35A, with compression, is capable of producing average audio output levels and clarity normally expected from amplifiers with a much higher output power rating. The FP-PA35A circuits are all designed for low power consumption. In the absence of an audio input, a digital timer is enabled to switch the class D output stage off. When this sleep mode is active, the amplifier module and its included RDL power supply consume less than 1 W of mains power. A front-panel control sets the sleep mode delay timer to 5, 15 or 25 minutes. The control also permits the installer to bypass the sleep mode to conform to system specifications that require the amplifier to be active at all times. Upon detection of an input signal, the amplifier is nearly inaudibly and instantly restored to full operation within 150 milliseconds. A blue POWER LED illuminates when the FP-PA35A is powered from its external 24 Vdc power supply. The power LED is dimly illuminated when the sleep mode disables the amplifier and glows brightly when the amplifier operation is fully enabled. The module is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stage produces minimal heat for all levels of expected voice or music modulation. Continuous full-power operation with audio tones will not damage the amplifier, but is not recommended.
- 35 Watts RMS Constant Voltage Amplifier
- 25 V, 70 V or 100 V Output
- Automatic Energy-Saving Sleep Mode
- Selectable Sleep Delay: Off, 5, 15, 25 Minutes
- Input / Output Terminal Block Connections
- Line Level Balanced or Unbalanced Input
- Compressor/Limiter Controls Clipping
- LED to Indicate Audio Compression Threshold
- Compressor Produces Maximized Average Output Power
- Audio Quality Superior to Standard Amplifiers
- Ultra-compact All Metal Construction
- High-Efficiency Class D Operation
- Thermal and Short-Circuit Protection
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Shipping Weight: 3.90 lbs
- Depth: 6.04 in
- Height: 2.80 in
- Width: 3.25 in
- INPUT: Line level (+4 dBu nominal balanced; -10 dBV nominal unbalanced)
- Input Impedance: 20 kohm balanced bridging; 10 kohm unbalanced
- Input / Output Connectors: Detachable terminal block
- Gain Adjustment: Single turn audio taper
- Minimum Input Levels: Balanced: -14 dBu; Unbalanced: -15 dBV (to cross compressor threshold)
- Maximum Input Levels: Balanced: +22 dBu; Unbalanced: +20 dBV
- Compressor: Threshold 2 dB below rated output, automatic adjusting attack and release times
- Noise: <-75 dB (below 35 W RMS)
- CMRR: > 60 dB (50 Hz to 120 Hz)
- Output Power: 35 W RMS @ 25 V, 70 V or 100 V
- Sleep Mode Power Consumption: < 1 W (amplifier and included power supply)
- Sleep Mode Delay: 5, 15 or 25 minutes (selectable)
- Sleep Mode Disable: Selectable
- Active Mode Delay: < 150 mS after input audio detected
- Audio Detector Threshold: -50 dBu balanced, -52 dBV unbalanced
- Indicators (2): Red LED: PEAK LED indicates compressor activity, Blue LED: Power ON, Dim: Sleep mode active; Bright: Amplifier active
- Power Supply (included): 100 to 240 Vac, 50-60 Hz, 1.3 A, IEC C14; Output to module: 24 Vdc, 2 A, Ground-referenced
FP-NML2
- Network to Mic/Line Interface
FP-NML2P
- Network to Mic/Line Interface with PoE
FP-NML2V
- Network to Mic/Line Interface with VCA
FP-NML2VP
- Network to Mic/Line Interface with VCA, PoE
FP-PA20
- Power Amplifier - 20 W 8 ohms
FP-PA20A
- 20 W Mono Audio Amplifier, 70 V or 100 V
FP-PA20B
- 20 W Mono Audio Amplifier 25 V
HD-MA35
- 35watt Mixer Amplifier with Power Supply - Low Impedance Output 4 Ohm or 8 Ohm
HD-PA35
- 35watt Power Amplifier with Power Supply, Low Impedance Output 4 Ohm or 8 Ohm
HD-PA35A
- HD-PA35A 35 Watt Power Amplifier with Power Supply - Constant Voltage Output 25 V, 70 V or 100 V
HD-PA35AX
- 35W Power Amplifier, 25V or 70V or 100 V Output, 9dBV Maximum Input Level
HD-PA35X
- 35W Power Amplifier, 4ohms or 8ohms Output, 9dBV Maximum Input Level
SF-PA50A
- 50W Mono Audio Amplifier - 70V or 100V
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Radio Design Labs
Model: FP-PA35A
Request more information from a dealer near you
close
Request more information from a dealer near you