Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Acoustic Dampener
Model: VibDamp
- Application Information:
- Base material should be free of grease, oil, dirt, scale and moisture. Wire Brushing is recommended.
- Adhesion is greatly improved on unfinished metal surfaces if zinc chromate or red oxide primer is applied first.
- Can be applied by high pressure pump airless spray equipment. (Recommended pump ratios are 20:1, 30:1, and 40:1. Maximum tip size: 0.045 inch.)
- Maximum application thickness per layer: 9/64” wet, which dries hard in 24 hrs. @ 77°F. A 1/32” layer dries hard in 4 hrs. @ 77°F, or can be dried in 5 min. at 220°F.
Product Info
Tech Specs
Vibrating surfaces are often dampened by applying visco-elastic materials directly to the surface, thus converting the vibration energy to heat. The flexing of the damping material provides the energy dissipation and “decay” to reduce noise. Metal no longer “rings” when it is struck or excited by airborne noise.
- Application Information:
- Base material should be free of grease, oil, dirt, scale and moisture. Wire Brushing is recommended.
- Adhesion is greatly improved on unfinished metal surfaces if zinc chromate or red oxide primer is applied first.
- Can be applied by high pressure pump airless spray equipment. (Recommended pump ratios are 20:1, 30:1, and 40:1. Maximum tip size: 0.045 inch.)
- Maximum application thickness per layer: 9/64” wet, which dries hard in 24 hrs. @ 77°F. A 1/32” layer dries hard in 4 hrs. @ 77°F, or can be dried in 5 min. at 220°F.
- Color: Light beige, non-reflective stipple finish
- Density: 85.3 lb./cu. ft (wet), 72.9 lb./cu. ft. (dry), 350 pentrometer viscosity at 80°F. Sprayable loose paste
- Sanitation: All components have FDA approval. Vermin resistant
- Chemical Resistivity: Resists dilute acids, alkalies, grease, gasoline, aliphatic oils. Dried coating will soften with prolonged soaking in water, but will recover after subsequent drying
- Toxicity: Material Safety Data Sheet (OSHA) available upon request
- Flame Resistance: Passes ASTM E162-76, Flame Spread 0.59, Smoke Developed 0.1
- Temperature Limits: Useful range of 25° to 120°F; maximum service range of -20° to 120°F. Coating is non-ageing
- Warning: Wet material is an emulsion and therefore should b
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Acoustics First Corp.
Model: VibDamp
Request more information from a dealer near you
close
Request more information from a dealer near you