Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
8 Mic/Line Input Expander for iDR System
Series: iDR
Model: iDR-In
Part #: AH-iDR-In
- RJ45 connector
- Proprietary 8 channel digital audio
- Connects to iDR-4 or iDR-8 main unit
- CAT5 STP cable up to 250 metres (825 feet)
- 24bit resolution
Product Info
Tech Specs
Documents
The iDR-In audio expander provides an additional 8 mic/line inputs on XLR when connected to an iDR-4 or iDR-8.
iDR-In converts the analogue audio to an 8 channel wide digital bus which feeds the main iDR unit, which can be up to 250 metres away, via CAT5 STP cable. iDR-In features high grade mic/line preamps with PC configured gain, pad and phantom power switching via DR-Link, and a built-in soft clip. The expander has 8 front panel LEDs in addition to the 3 status indicators - these are 3-colour soft LEDs which can be assigned as audio meters, mute indicators or presets related indicators and are programmed in the usual way using the iDR System Manager software.
iDR-In converts the analogue audio to an 8 channel wide digital bus which feeds the main iDR unit, which can be up to 250 metres away, via CAT5 STP cable. iDR-In features high grade mic/line preamps with PC configured gain, pad and phantom power switching via DR-Link, and a built-in soft clip. The expander has 8 front panel LEDs in addition to the 3 status indicators - these are 3-colour soft LEDs which can be assigned as audio meters, mute indicators or presets related indicators and are programmed in the usual way using the iDR System Manager software.
- RJ45 connector
- Proprietary 8 channel digital audio
- Connects to iDR-4 or iDR-8 main unit
- CAT5 STP cable up to 250 metres (825 feet)
- 24bit resolution
- Serial control of iDR expander units
- Proprietary Allen & Heath control protocol
- IN and OUT ports provided to allow daisy chaining through multiple units
- CAT5 STP cable up to 300 metres (1000 feet)
- Universal mains input switched mode design
- IEC 3pin
- Country dependent mains lead supplied
- Rear panel power on/off switch
- Power –mains power on
- Link – iDR-Link control communicating
- Lock –audio communicating
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Number of Channels: 8
- Rack Units (Height): 1
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
- Depth: 9.13 in
- Height: 1.73 in
- Width: 19.02 in
- Product Weight: 7.72 lbs
- Connector: Female 3pin XLR
- Sensitivity: -50dBu to +5dBu
- Gain Range: -15 to +50dB in 3dB steps
- Sensitivity (pad out): -50 to -5dBu
- Sensitivity (pad in): -30 to +15dBu
- Maximum Input Level: +33 dBu
- Pre converter soft limiter: -4dBFS switchable
- Phantom Power: 48 V DC switched
- Crosstalk: <-80 dB @ 1kHz, 0dB gain
- Residual Output Noise: <-93 dBu
- Input to output noise @: 0 dB gain <-87dBu
- Input to output noise @: 50 dB gain <-73dBu
- Latency: <2.4ms expander XLR to/from iDR XLR
- AC Mains Input: 100 to 240 V AC 50/60Hz, 25VA max
- Fuse: T500mAL 20mm
Expander
1214 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Allen & Heath
Model: iDR-In
Request more information from a dealer near you
close
Request more information from a dealer near you