Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
120W Mixer Amplifier with 4 to 16 Ohm Output Constant Resistance
Model: EQ-AMP120
- MIC input with front- and rear-panel connectors
- 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output
- Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume
- Intelligent limiter can reduce excess signal
- Reliable protection against overload, short circuit, and power fluctuation for optimum reliability
Product Info
Tech Specs
Documents
120W mixer amplifier, MIC input with front- and rear-panel connectors. 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output. Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume. Intelligent limiter can reduce excess signal. Reliable protection against overload, short circuit, and power fluctuation for optimum reliability. Oversized heat sinks protect against overheating, protecting the amplifier’s working lif. Interrupt feature mutes AUX inputs when signal is detected on the MIC input -speed of restoration of AUX inputs may be adjusted from sharp to gradual. Phantom power available on mic input for condenser-type microphones.
- MIC input with front- and rear-panel connectors
- 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output
- Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume
- Intelligent limiter can reduce excess signal
- Reliable protection against overload, short circuit, and power fluctuation for optimum reliability
- Oversized heat sinks protect against overheating, protecting the amplifier’s working life
- Interrupt feature mutes AUX inputs when signal is detected on the MIC input -speed of restoration of AUX inputs may be adjusted from sharp to gradual
- Phantom power available on mic input for condenser-type microphones
- Amplifier Signal Type - Audio
- Amplifier Type - Mixer Amplifier
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 14 F
- Maximum Frequency Response (Bandwidth): 15 kHz
- Maximum Frequency Response (Bandwidth): 15000 Hz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Impedance: 15000 ohm
- Sensitivity: 1 dBV
- Total Harmonic Distortion + Noise (THD+N): 1 %
- AC Voltage: 110 Volts
- Active Power: 120 Watt
- Peak Power: 200 Watt
- Depth: 13.90 in
- Height: 5.20 in
- Width: 19.10 in
- Product Weight: 25.78 lbs
- Shipping Weight: 30.30 lbs
- Distortion: <1 %
- Input Tone Control: Bass: 100Hz, Treble: 10kHz at 12dB
- Cooling Mode: Air Cooling
Amplifier
333 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Applied Media Technologies Corporation
Model: EQ-AMP120
Request more information from a dealer near you
close
Request more information from a dealer near you