Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
20W Mixer Amplifier with 4 to 16 Ohm Output Constant Resistance
Model: EQ-AMP20W
- Three input jacks
- Microphone interrupt circuit
- Auxiliary input is muted
- Separate bass and treble tone controls
- Dual 110 to 120Vac or 12Vdc power inputs
Product Info
Tech Specs
Documents
20W mixer amplifier with MIC input with front- and rear-panel connectors. Rear-panel AUX 1 and AUX 2 inputs. Rear panel line-level output allows connection to another amplifier with 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-resistance speaker output. Commercial-grade toroidal transformers produce high performance audio on a wide range of frequencies with minimal noise and high fidelity, even at high volume. Intelligent limiter can reduce excess signal. Reliable protection against overload, short circuit and power fluctuation for optimum reliability. Oversized heat sinks protect against overheating, protecting the amplifier’s working life.
- Three input jacks
- Microphone interrupt circuit
- Auxiliary input is muted
- Separate bass and treble tone controls
- Dual 110 to 120Vac or 12Vdc power inputs
- Amplifier Signal Type - Audio
- Amplifier Type - Mixer Amplifier
- Warranty - Yes
- Spec Sheet available - Yes
- Warranty (Length/Type): 1 Year Limited
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 50 F
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 40 Hz
- Minimum Frequency Response (Bandwidth): 0.04 kHz
- Impedance: 20000 ohm
- Number of Channels: 2
- Sensitivity: 1 dBV
- Signal to Noise Ratio: 90 dB
- Total Harmonic Distortion + Noise (THD+N): 0.50 %
- AC Voltage (Maximum): 120 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 80 Watt
- Depth: 11.42 in
- Height: 3.46 in
- Width: 14.17 in
- Product Weight: 14.77 lbs
- Shipping Weight: 17.42 lbs
- Power Handling: 20 Watt
- Output Power: RMS 20W continuous/30W maximum
- Output Voltage: 70 V
- Inputs: 1.3 mV Aux/100mV Mic
- Input Tone Control: Bass: 100Hz, Treble: 10kHz at 12dB
EQ-AMP20W Data Sheet.pdf
229 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Applied Media Technologies Corporation
Model: EQ-AMP20W
Request more information from a dealer near you
close
Request more information from a dealer near you