Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
8-channel 250W Protea Equipped Network DSP Power Amplifier
Series: pema Series
Model: pema8125
- 4 or 8-channel amplifier
- 8 built-in mic pre’s
- 2-bit SHARC DSP
- Dedicated telephone/PBX input
- Post DSP Aux line level outputs
Product Info
Tech Specs
Related Products
Documents
Pema sets new industry benchmark for value-engineered zone sound systems. By seamlessly merging Ashly’s powerful, open-architecture DSP functionality with Ashly’s renowned amplifier performance inside two-rack space unit, pema lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming. Four and eight amplifier channel versions are available at both 125 and 250 Watts per channel. Full 96kHz performance is available on 32-bit SHARC processors for utterly transparent audio.
- 4 or 8-channel amplifier
- 8 built-in mic pre’s
- 2-bit SHARC DSP
- Dedicated telephone/PBX input
- Post DSP Aux line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Ambient noise compensation
- Automatic feedback suppression
- 8-in x 8-out sophisticated matrix mixing
- Dual RCA and balanced euroblock inputs
- Built-in pink/white noise and sine wave generator
- Gain sharing automatic microphone mixing (Automixer)
- 125 or 250 watts per channel, Low-Z and constant voltage Models (70V and 100V)
- Amplifier Type - Power Amplifier
- Warranty - Yes
- Transformer Option - Yes
- Rackmountable - Yes
- Low Voltage Control - Yes
- Must be Level - Yes
- Dante Enabled - Yes
- Loudspeaker Voltage - 70V
- Loudspeaker Voltage - 100V
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Low Voltage Control: Yes
- Must be Level: Yes
- Rackmountable: Yes
- Transformer Option: Yes
- Thermal Dissipation (1/3 Power Sine Wave): 251 BTU/Hour
- Warranty (Length/Type): 5 Years Limited
- AC Voltage: 120 Volts
- Active Power: 125 Watt
- Current Draw: 1.70 Amps
- Depth: 15.50 in
- Height: 3.50 in
- Width: 19 in
- Product Weight: 21 lbs
- Mount Type: Rack
- 70V Taps: 125 Watt
- 100V Taps: 125 Watt
- Certifications: FCC, CE
- Minimum Frequency Response (Bandwidth): 20 Hz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Signal to Noise Ratio: 102 dB
- Number of Channels: 8
- Number of Inputs: 8
- Number of Outputs: 8
- Total Harmonic Distortion + Noise (THD+N): 0.50 %
- Number of Watts Per Channel: 250 Watt
- Rack Units (Height): 2
- Operating Temperature (Maximum): 120.20 F
- Operating Temperature (Minimum): 39.20 F
neWR-5
- Programmable Ethernet Based Remote Control
pema4125
- 4-channel 250W Protea Equipped Network DSP Power Amplifier
pema4250
- 4-channel 500W Protea Equipped Network DSP Amplifier
pema8250
- 8-channel 500W Protea Equipped Network DSP Amplifier
WR-1.5
- Single Potentionmeter Remote Control
WR-5
- Microprocessor-based Programmable Remote Control
Power Amplifier
792 kb
- Data Sheet
Power Amplifier
2138 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Ashly Audio, Inc.
Model: pema8125
Request more information from a dealer near you
close
Request more information from a dealer near you