Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Line Input Transformer with 4:1 Turns Ratio
Model: JT-10KB-DPC
- Ideal for balancing any high-impedance unbalanced input
- Wide bandwidth -3dB at 0.5Hz and 180kHz
- Recommended for levels up to +21dBu at 20Hz
- High input impedance of 40kohm
- High common-mode rejection of 120dB at 60Hz
Product Info
Tech Specs
Documents
Line input transformers provide the maximum possible Common Mode Rejection of unwanted signals. All models have a single Faraday shield and a 30dB magnetic shield can. Models are available in 1:1, 1:1.4, 1:2, 2:1 and 4:1 ratios. Several models are also available as octal plug-in versions. This transformer is designed for use in wideband line input stages. The secondary source impedance of only 225ohm is an excellent match to ultra-low noise amplifiers. The primary is fully balanced and its leads may be reversed to invert polarity, if required. A 30dB magnetic shield package is standard.
- Ideal for balancing any high-impedance unbalanced input
- Wide bandwidth -3dB at 0.5Hz and 180kHz
- Recommended for levels up to +21dBu at 20Hz
- High input impedance of 40kohm
- High common-mode rejection of 120dB at 60Hz
- Audio Transformer Type - Input Transformer
- Audio Transformer Type - Line Transformer
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): 32 F
- Maximum Bandwidth: 180 kHz (-3dB)
- Impedance Ratio: 40k:2.4k
- Input Impedance: 41.5 kohm (1kHz, +4dBu, test circuit 1)
- Voltage Gain: -12.9 dB (1kHz, +4dBu, test circuit 1)
- Magnitude response, ref 1 kHz: -0.04 (20Hz, +4dBu, test circuit 1, Rs=600ohm) and -0.03 (20kHz, +4dBu, test circuit 1, Rs=600ohm) dB
- Deviation from linear phase (DLP): +0.6/-0.1 degree (20Hz to 20kHz, +4dBu, test circuit 1, Rs=600ohm)
- Distortion (THD): <0.001 (1kHz, +4dBu, test circuit 1, Rs=600ohm) and 0.015 (20Hz, +4dBu, test circuit 1, Rs=600ohm) %
- Maximum 20Hz input level: +21 dBu (1% THD, test circuit 1, Rs=600ohm)
- Common-mode rejection ratio (CMRR) 50ohm balanced source: 120 (60 Hz, test circuit 2) and 85 (3kHz, test circuit 2) dB
- Common-mode rejection ratio (CMRR) 600ohm unbalanced source: 90 (60Hz, test circuit 3) and 55 (3kHz, test circuit 3) dB
- Output Impedance: 225 kohm (1kHz, test circuit 1, Rs=600ohm)
- Primary DC resistances: 2.5 kohm (RED to BRN)
- Secondary DC resistances: 92 kohm (YEL to ORG)
- Capacitance at 1kHz: 120 (primary to shield and case) and 115 (secondary to shield and case) pF
- Turns Ratio: 4.000:1
- Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60Hz, 1 minute test duration)
Transformer
179 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Jensen Transformers, Inc.
Model: JT-10KB-DPC
Request more information from a dealer near you
close
Request more information from a dealer near you