Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Stereo Microphone Splitter/Isolator
Model: MS-2XX
- Ruler flat frequency response preserves audiophile quality signals
- High-grade nickel-iron-molybdenum alloy cores for extremely low distortion
- Faraday shielded windings for maximum RF interference rejection
- High quality gold plated connectors for long term reliability
- Solves transformer-less mic pre-amp RF interference problems
Product Info
Tech Specs
Documents
MS-2XX is designed to provide over 130dB of common mode isolationat 60Hz and to help eliminate RF interference from radio and television stations. Transformer isolation allows maximum interconnection flexibility, since both sources and loads may be either balanced or unbalanced. Inputs are driven by 150 to 200ohms nominal mics and outputs feed mic pre-amps. As a splitter, direct outputs are taken from the barrier strip IN terminals while isolated outputs are taken from the XLR outputs (isolated outputs don’t pass phantom power). Internal shielding prevents hum pickup from magnetic fields.
- Ruler flat frequency response preserves audiophile quality signals
- High-grade nickel-iron-molybdenum alloy cores for extremely low distortion
- Faraday shielded windings for maximum RF interference rejection
- High quality gold plated connectors for long term reliability
- Solves transformer-less mic pre-amp RF interference problems
- Provides additional, isolated balanced outputs as mic splitter
- 130dB of common-mode rejection at 60Hz eliminates hum
- Excellent frequency response and time domain performance
- Integral ground option switches solve other equipment problems
- Spec Sheet available - Yes
- Input Impedance: 1.08 kohms (1kHz, -20dBu, test circuit 1)
- Voltage Gain: -0.82 dB (1kHz, -20dBu, test circuit 1)
- Deviation from linear phase (DLP): +1.7/-0 ° (20Hz to 2kHz, -20dBu, test circuit 1)
- Distortion (THD): 0.036 % (20Hz, -20dBu, test circuit 1)
- Maximum 20Hz input level: +2.0 dBu (1% THD, test circuit 1)
- Common-mode rejection ratio (CMRR): 130/115 dB (60Hz, test circuit 2/3)
- Allowable Source Impedance: 150 ohms (output impedance of device connected to ISO-MAX input)
- Allowable Load Impedance: 1.5 kohms (input impedance of device connected to ISO-MAX output)
- Output Impedance: 231 ohms (1kHz, test circuit 1)
- Input DC Resistances: 50 ohms
- Output DC Resistances: 50 ohms
- Capacitances: 75 pF (1kHz, input to output shield)
- Input to output voltage difference: 24Vrms 34V peak (any input to any output shield or any shield to case, 60Hz)
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): 32 F
Stereo Microphone Splitter/Isolator
489 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Jensen Transformers, Inc.
Model: MS-2XX
Request more information from a dealer near you
close
Request more information from a dealer near you