Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4-channel Wireless RF Receiver
Series: AD
Model: AD4Q
- Wide tuning range up to 184MHz
- True digital diversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench® and ShurePlus™ Channels app
- Quadversity™ mode for extended antenna coverage and improved RF signal-to-noise
- Front panel headphone jack enables Dante Cue and Dante Browse monitoring
Product Info
Tech Specs
Related Products
Documents
Other Options
The AD4Q Axient Digital Quad Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity™, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + Dante output, and signal routing options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters.
- Wide tuning range up to 184MHz
- True digital diversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench® and ShurePlus™ Channels app
- Quadversity™ mode for extended antenna coverage and improved RF signal-to-noise
- Front panel headphone jack enables Dante Cue and Dante Browse monitoring
- Configurable Ethernet switch for redundant Dante digital output
- Switchable XLR/AES3 outputs
- Channel Quality meter displays RF signal-to-noise
- Locking AC connectors
- Optional DC module available to support redundant power
- Wireless Receiver Transmission - RF
- Wireless - Yes
- Spec Sheet available - Yes
- Depth: 13.10 in
- Height: 1.70 in
- Width: 19 in
- Product Weight: 10.60 lbs
- Current Draw: 0.68 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Number of Channels: 4
- Housing: Steel, Extruded aluminum
- Thermal Dissipation: Maximum: 31 W (106 BTU/hr), Idle: 21 W (72 BTU/hr)
- Audio Output:
•Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
•Configuration: 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
•Impedance: 100-ohm
•Full Scale Output: 1/4" (6.35 mm): +8 dBV XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
•Mic/Line Switch: 30dB pad
•Phantom Power Protection: Yes - NETWORKING:
•Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
•Network Addressing Capability: DHCP or Manual IP address
•Maximum Ethernet Cable Length: 100 m (328 ft) - Cascade output:
•Connector Type: BNC
•Note: For connection of one additional receiver in the same band
•Configuration: Unbalanced, passive
•Impedance: 50-ohm
•Insertion Loss: 0dB, typical - RF Input:
•Spurious Rejection: >80dB, typical
•Connector Type: BNC
•Impedance: 50-ohm
•Bias Voltage 12 to 13.5VDC, 150mA maximum, per antenna, switchable on/off
•RF Carrier Frequency Range
•AD4Q=A: 470-636MHz
•AD4Q=B: 606-810MHz
•AD4Q=C: 750-960MHz
AD3=-G57
- 470 to 616 MHz Axient Digital Plug-On Wireless Transmitter
AD3=-K54
- 606 to 663 MHz Axient Digital Plug-On Wireless Transmitter
AD3=-X55
- 941 to 960 MHz Axient Digital Plug-On Wireless Transmitter
Axient Digital
- Wireless Digital Audio System
Transmitter/Receiver
872074 kb
- Data Sheet
by
Shure Incorporated
Model: AD4Q-DC=-A
by
Shure Incorporated
Model: AD4Q-DC=-B
by
Shure Incorporated
Model: AD4Q-DC=-C
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Shure Incorporated
Model: AD4Q
Request more information from a dealer near you
close
Request more information from a dealer near you