Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
600 Ohms to 600 Ohms Repeat Coil Transformer
Model: JT-11SSP-6M
- Ideal for use with low input impedance circuits
- Wide bandwidth of -3dB at 0.4Hz and 220kHz
- Recommended for levels up to +19dBu at 20Hz
- Insertion loss only 1.9dB in 600ohm to 600ohm application
- High common-mode rejection of 110dB at 60Hz
Product Info
Tech Specs
Related Products
Documents
Line input transformers provide the maximum possible Common Mode Rejection of unwanted signals. All models have a single Faraday shield and a 30dB magnetic shield can. Models are available in 1:1, 1:1.4, 1:2, 2:1 and 4:1 ratios. Several models are also available as octal plug-in versions. This transformer has split primary and secondary windings which can be connected for 1:2 (150:600ohm), 1:1 (600:600ohm) or 2:1 (600:150ohm) operation. Distortion, although specified for 600ohm sources, will be further reduced by lower impedances. A 30dB magnetic shield package is standard.
- Ideal for use with low input impedance circuits
- Wide bandwidth of -3dB at 0.4Hz and 220kHz
- Recommended for levels up to +19dBu at 20Hz
- Insertion loss only 1.9dB in 600ohm to 600ohm application
- High common-mode rejection of 110dB at 60Hz
- Audio Transformer Type - Internal Transformer
- Audio Transformer Type - Line Transformer
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): 32 F
- Maximum Bandwidth: 220 kHz (-3dB)
- Impedance Ratio: 600:600, 600:150 and 150:600
- Input Impedance: 745 kohm (1kHz, +4dBu, test circuit 1)
- Voltage Gain: -1.9 dB (1kHz, +4dBu, test circuit 1)
- Magnitude response, ref 1 kHz: -0.05 (20Hz, +4dBu, test circuit 1, Rs=600ohm) and -0.01 (20kHz, +4dBu, test circuit 1, Rs=600ohm) dB
- Deviation from linear phase (DLP): +0.6/-0 degree (20Hz to 20kHz, +4dBu, test circuit 1, Rs=600ohm)
- Distortion (THD): <0.001 (1kHz, +4dBu, test circuit 1, Rs=600ohm) and 0.04 (20Hz, +4dBu, test circuit 1, Rs=600ohm) %
- Maximum 20Hz input level: +19 dBu (1% THD, test circuit 1, Rs=600ohm)
- Common-mode rejection ratio (CMRR) 50ohm balanced source: 110 (60Hz, test circuit 2) and 75 (3kHz, test circuit 2) dB
- Common-mode rejection ratio (CMRR) 600ohm unbalanced source: 79 (60Hz, test circuit 3) and 45 (3kHz, test circuit 3) dB
- Output Impedance: 745 ohm (1kHz, test circuit 1, Rs=600ohm)
- Total primary DC resistance: 32 ohm (RED to ORG)
- Total secondary DC resistances: 113 ohm (GRY to GRN)
- Capacitance at 1kHz: 950pF (total primary to shield and case) and 1.12nF (total secondary to shield and case)
- Turns Ratio: 1.000:1 any winding to any other winding
- Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60Hz, 1 minute test duration)
JT-11SSP-7MPC
- Standard Wide Bandwidth Line Input Transformer
Transformer
188 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Jensen Transformers, Inc.
Model: JT-11SSP-6M
Request more information from a dealer near you
close
Request more information from a dealer near you