Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Standard Wide Bandwidth Line Input Transformer
Model: JT-11SSP-7MPC
- Ideal for use with low input impedance circuits
- Wide bandwidth of -3dB at 0.4Hz and 220kHz
- Recommended for levels up to +21dBu at 20Hz
- Insertion loss only 1.9dB in 600ohm to 600ohm application
- High common-mode rejection of 125dB at 60Hz
Product Info
Tech Specs
Related Products
Documents
Line input transformers provide the maximum possible Common Mode Rejection of unwanted signals. All models have a single Faraday shield and a 30dB magnetic shield can. Models are available in 1:1, 1:1.4, 1:2, 2:1 and 4:1 ratios. Several models are also available as octal plug-in versions. This transformer has split primary and secondary windings which can be connected for 1:2 (150:600ohm), 1:1 (600:600ohm) or 2:1 (600:150ohm) operation. Distortion, although specified for 600ohm sources, will be further reduced by lower impedances. A 30dB magnetic shield package is standard.
- Ideal for use with low input impedance circuits
- Wide bandwidth of -3dB at 0.4Hz and 220kHz
- Recommended for levels up to +21dBu at 20Hz
- Insertion loss only 1.9dB in 600ohm to 600ohm application
- High common-mode rejection of 125dB at 60Hz
- Audio Transformer Type - Input Transformer
- Audio Transformer Type - Line Transformer
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): 32 F
- Maximum Bandwidth: 200 kHz (-3dB)
- Impedance Ratio: 600:600
- Input Impedance: 750 kohm (1kHz, +4dBu, test circuit 1)
- Voltage Gain: -1.9 dB (1kHz, +4dBu, test circuit 1)
- Magnitude response, ref 1 kHz: -0.06 (20Hz, +4dBu, test circuit 1, Rs=600ohm) and -0.02 (20kHz, +4dBu, test circuit 1, Rs=600ohm) dB
- Deviation from linear phase (DLP): +0.6/-0 degree (20Hz to 20kHz, +4dBu, test circuit 1, Rs=600ohm)
- Distortion (THD): <0.001 (1kHz, +4dBu, test circuit 1, Rs=600ohm) and 0.025 (20Hz, +4dBu, test circuit 1, Rs=600ohm) %
- Maximum 20Hz input level: +21 dBu (1% THD, test circuit 1, Rs=600ohm)
- Common-mode rejection ratio (CMRR) 50ohm balanced source: 125 (60Hz, test circuit 2) and 95 (3kHz, test circuit 2)
- Common-mode rejection ratio (CMRR) 600ohm unbalanced source: 110 (60Hz, test circuit 3) and 80 (3kHz, test circuit 3) dB
- Output Impedance: 750 ohm (1kHz, test circuit 1, Rs=600ohm)
- Total primary DC resistance: 39 ohm total primary, Pin 2 to Pin 5, Pin 1 and Pin 6 shorted
- Total secondary DC resistances: 112 ohm total secondary, Pin 8 to Pin 11, Pin 7 and Pin 12 shorted
- Capacitance at 1kHz: 676 pF (total primary to shield and case)
- Turns Ratio: 1.000:1 any winding to any other winding
- Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60Hz, 1 minute test duration)
JT-11SSP-6M
- 600 Ohms to 600 Ohms Repeat Coil Transformer
Transformer
217 kb
- Data Sheet
Request Quote
Suggested Products
by
RDL, Radio Design Labs
Thank you!
Someone will be in touch with you shortly.
Contact Lowrance Sound Company, Inc.
close
Lowrance Sound Company, Inc.
2132 Nailing Drive
Union City, TN 38261
USA
(901) 885-4504
www.lowrancesoundcompany.com
Contact in regards to this product:
Jensen Transformers, Inc.
Model: JT-11SSP-7MPC
Request more information from a dealer near you
close
Request more information from a dealer near you